Thermo Scientific 5028i, Instruction Manual

Page: 304 / 330

C-Link Protocol Commands
Record Layout Definition
B-64 Model 5028
i
Instruction Manual Thermo Fisher Scientific
bits have been extracted, they are shifted down to the bit-zero position.
Thus, the possible values of this example will be 0 through 3. The
translation list shows the words which correspond to each input value,
the zero index value appearing first (0 -> local, 1 -> remote, etc.). The
selection list shows that only the first two values, in this case, are to be
shown to the user when the button is pressed. The ‘T’ button indicates
full translation, input code to string, and user selection number to
output string.
‘\xC’
This is a line that starts a new column (the \xC or ^L).
‘ Comp:6.11x{off on}Tset temp comp
%
s\n’
This shows that the bitfield end (the second part of a bitfield
specification) is optional. The bitfield will be one bit long, starting in
this case at the eleventh bit.
‘Background:7f*8Bd.ddd;set o3 bkg
%
s\n’
This shows the use of indirect precision specifiers for floating point
displays. The background value is taken from the 7th element, and the
precision specifier is taken from the 8th. If the asterisk were not present,
it would indicate instead that 8 digits after the decimal point should be
displayed.