Teledyne T300, Operation Manual, Page: 181 / 426

Teledyne API – Model T300/T300M CO Analyzer Data Acquisition System (DAS) and APICOM
179
To define the REPORT PERIOD , follow the instruction shown in Section 7.1.4 then
press:
Starting at the EDIT CHANNEL MENU
SETUP X.X 0) CONC: ATIMER 1, 800
PREV MEXT INS DEL EDIT PRNT EXIT
SETUP X.X NAME: CONC
<SET SET> EDIT EXIT
SETUP X.X REPORT PERIOD:000:01:00
<SET SET > EDIT EXIT
Use the PREV and
NEXT buttons to
scroll to the DATA
CHANNEL to be
edited.
SETUP X.X REPORT PERIOD DAYS:0
0 0 0 ENTR EXIT
Toggle these buttons to
set the days between
reports (0 – 366).
SETUP X.X REPORT PERIOD TIME:01:00
0 1 0 0 ENTR EXIT
Press buttons to set hours
between reports in the format:
HH:MM (max: 23:59).
This is a 24 hour clock .
PM hours are 13 thru 23,
midnight is 00:00.
Example
2:15 PM = 14:15
EXIT discards the new
setting.
ENTR accepts the
new setting.
Continue pressing SET> until ...
The SAMPLE PERIOD and REPORT PERIOD intervals are synchronized to the
beginning and end of the appropriate interval of the instruments internal clock.
•
If SAMPLE PERIOD were set for one minute the first reading would occur at the
beginning of the next full minute according to the instrument’s internal clock.
•
If the REPORT PERIOD were set for of one hour, the first report activity would occur
at the beginning of the next full hour according to the instrument’s internal clock.
EXAMPLE:
Given the above settings, if the DAS were activated at 7:57:35 the first sample would
occur at 7:58 and the first report would be calculated at 8:00 consisting of data points for
7:58, 7:59 and 8:00.
During the next hour (from 8:01 to 9:00), the instrument will take a sample reading
every minute and include 60 sample readings.
06864B DCN6314