Teledyne T300, Operation Manual, Page: 175 / 426

Teledyne API – Model T300/T300M CO Analyzer Data Acquisition System (DAS) and APICOM
173
7.1.4. EDITING DAS CHANNELS
DAS configuration is most conveniently done through the APICOM remote control
program. The following list of button strokes shows how to edit the DAS using the front
panel.
EDIT Channel Menu
Main iDAS Menu
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE EXIT
SETUP X.X DATA ACQUISITION
VIEW EDIT EXIT
SETUP X.X 0) CONC: ATIMER 1, 800
NEXT INS DEL EDIT PRNT EXIT
SETUP X.X ENTER PASSWORD:818
8 1 8 ENTR EXIT
Enters EDIT mode for the selected channel
PRINT
PREV
INS
NEXT
DEL
Button
Exports the configuration of all data channels to the
RS-232 interface
Selects the previous data channel in the list
Inserts a new data channel into the list BEFORE the
selected channel
Selects the next data channel in the list
Deletes the currently selected data channel
FUNCTION
Buttons only appear when applicable.
DAS EDIT – Control Button Functions
EDIT
Enters EDIT mode
SAMPLE RANGE=50.0 PPM CO= XX.XX
<TST TST> CAL SETUP
When editing the data channels, the top line of the display indicates some of the
configuration parameters.
For example, the display line:
0) CONC: ATIMER, 1, 800
Translates to the following configuration:
Channel No.: 0
NAME: CONC
TRIGGER EVENT: ATIMER
PARAMETERS: One parameter is included in this channel
EVENT: This channel is set up to store 800 records.
06864B DCN6314