Teledyne T300, Operation Manual, Page: 11 / 426

ix
REVISION HISTORY
This section provides information regarding changes to this manual.
2012, February 14, T300/300M Manual, PN06864 Rev B
Document PN Rev DCN Change Summary
Top Assy Manual 06864 B 6314 Administrative changes: restructure to new T-Series format :
•
Consolidated Options sections and restructured into tabular
format; moved to Section 1.
•
Corrected Safety Compliance (was: IEC 61010-1:90 + A1:92 +
A2:95; is: IEC 61010-1:2001).
•
Added North American Certification statement.
•
Section 2.1 – added 2
nd
gas sensor options specs.
•
Replaced Fig 3-5 with correct internal layout illustration (was
short box; is long box).
•
Move pneumatic illustrations from Options section to
pneumatic setup section.
•
Gathered communications setup and operation into one group
(Section 6).
•
Renamed Part III from “Technical Information” to “Maintenance
and Service”.
•
Renamed “Troubleshooting and Repair” to “Troubleshooting
and Service”.
•
Renamed section “Theory of Operation” to “Principles of
Operation”.
•
Moved “Principles of Operation” section after “Maintenance”
and “Troubleshooting and Service” sections.
•
Moved FAQs to end of Troubleshooting/Service section
•
Moved Glossary to end of manual before Index.
Technical changes:
•
Status Outputs: added connection line for +5V to external
device (Fig 3-11) and corrected DC Power pin description
(Table 3-6, deleted “combined rating w/Control Output if used”).
•
Section 3.3.1.8: modify Multidrop connection section to clarify
insructions and add detail.
•
Correct COM1 default baud rate value to 115,200 (was:
19,200)
•
Added USB driver download instructions (Section 6.6)
•
Replaced Appendix D Wiring List Rev A with Rev B.
•
Replaced Appendix D Wiring Diagram Rev A with Rev B.
•
Swapped Appendix D Prss/Flow Transducer was 04003
(assembly dwg) is 04354 (elec. schematic).
•
Replaced Appendix D Schematic 06731 Rev A with Rev B.
2010, September 14, T300 Manual, PN06864 Rev Error! Unknown document property name. , DCN6314
Initial Release
06864B DCN6314