TallyGenicom 8124, User Manual

Page: 186 / 306

5.2 Description of Common Menu
186
5
Setting Con
trol Pa
nel
Tray Priority
When the optional paper tray is installed, set the priority of the trays from 1 to 4, to be automatically
selected by the auto tray switch.
The paper tray 5 (bypass tray) is not included in the selection.
■
1st to 3rd
Set the target tray to [1] to [3].
Same paper tray cannot be selected to each order. [2] tray can be selected from any tray except the one
which is chosen as [1] and [3] can be selected from any tray except [1] and [2]. Remaining paper tray
will be set to the 4th. By default, the order of the priority is set to the number of the paper trays 1 to 4.
Paper Size
Set the paper size to load into the paper tray.
For information about suitable paper sizes, refer to “Appendix A Main Specifications” (P.288).
■
Trays 1 to 4
[Auto] (default)
Select when loading paper of standard size.
[Non-Std]
Select [Non-Std] when printing with non-standard paper size, and specify its long edge and short
edge by 1 mm.
Paper Image Qty
Specify printing image quality for user number 1 to 5 from B (plain paper), C (recycled paper), S (not
used), T (not used), A (high quality).
For example, if you use blue plain paper, specify the name [Plain Blue] on the [Paper Name], and
then set [Image Quality] of [Plain Blue] to [Plain].
After this setting, standard blue paper is not output, even if the plain paper has priority over others.
Paper is fed following the priority set on [Plain Blue] (Custom 1) in the [Paper Priority].
Paper Name
You can change the user 1 to 5 displayed on the screen such as [Paper Priority], [Image Quality] and
[Paper Type] to the optional name.
■
Custom 1 to 5
*4 Characters listed in No.1 to 4 in can be used.
You can use up to 12 alphanumeric characters.
Print ID
Printing user ID in a specified position.
Default is [Off].