TallyGenicom 8124, User Manual

Page: 34 / 306

1.3 Setting the IP Address
34
Setting Printer Environment
1
Printing out [System Settings List]
Procedure
1
Refer to “Checking the Settings” (P.42), and print out the [System Settings List].
2
In the [System Settings List], check the address of each of [TCP/IP: IP Address],
[TCP/IP: Subnet Mask], [TCP/IP: Gateway Address] and [WINS: Primary Wins
Server Address], [WINS: Secondary Wins Server Address] under
[Communication Settings].
●
The layout of the [System Settings List] may differ depending on the configuration of options and
settings of this printer.
●
For information about how to check the [System Settings List], refer to the next section, “Checking
System Settings List”.
Checking [System Settings List]
■
When neither TCP/IP nor WINS address is obtained
Your network has neither a DHCP server nor a WINS server. Refer to “1.3.1
Setting Address” (P.35) to set the IP address.
■
When the address is obtained for TCP/IP but not for WINS
Your network has no WINS server. Do not use the DHCP environment
because printing may be disabled when the IP address assigned to this printer
is changed. Refer to “1.3.1 Setting Address” (P.35) to set the IP address of this
printer manually.
■
When both TCP/IP and WINS addresses are obtained.
Your network has the DHCP and WINS servers operating. It is recommended
to use the DHCP environment. The IP address of this printer will be set by the
DHCP server. The host name displayed in the [SMB] column on the [System
Settings List] is registered in the WINS server.