TallyGenicom 8124 User Manual Download Page 218

Page: 218 / 306

6.4 Poor Print Quality

218

Troubleshooting

Equally spaced bars
are printed.

The drum cartridge is dirty.

Print a few sheets of paper.

Drum cartridge has deteriorated or
is damaged.

Replace with new drum cartridge.

“7.2 Replacing Drum Cartridge” (P.245)

White dots appear in
the colored section.

Unsuitable paper is being used.

Load suitable paper.

“4.2 Loading Paper” (P.151)

Drum cartridge has deteriorated or
is damaged.

Replace with new drum cartridge.

“7.2 Replacing Drum Cartridge” (P.245)

Print blurs when
smeared with finger.
Toner is not fused.
Paper is stained by
toner.

The Paper loaded in the tray is not
consistent with the paper type
specified on the control panel.

Specify the appropriate paper type for
the paper that is loaded in the paper
tray from the control panel.

“4.1 About Paper” (P.146)

The paper is damp.

Replace with new paper.

“4.2 Loading Paper” (P.151)

Unsuitable paper is being used.

Load suitable paper.

“4.2 Loading Paper” (P.151)

Paper is completely
covered in toner.

Drum cartridge has deteriorated or
is damaged.

Replace with new drum cartridge.

“7.2 Replacing Drum Cartridge” (P.245)

High-voltage power supply may be
faulty.

Contact our Customer Support Center
or your dealers.

Symptom

Cause

Action

Summary of Contents for 8124



















































































































































































































































































































Search results

Summary of Contents for 8124

Reviews:

Related manuals for 8124

Brands by name

Popular brands

TallyGenicom 8124, User Manual

Search results

Summary of Contents for 8124

Reviews:

Related manuals for 8124

Brands by name

Popular brands