TallyGenicom 8124 User Manual Download Page 56

Page: 56 / 306

1.7 Installing the Adobe PS Printer Driver (Windows 95/98/Me)

Setting Printer Environment

Enter the printer name, specify other items as necessary and click Next.

Click Install.

Select whether to configure your printer now and click Next.

The printer can also be configured after all installation has been completed. Refer to “1.7.2 Printer
Driver Properties” below.

Set each item and click OK.

Select all the options installed on the printer.

Click Finish.

Confirm that a printer has been added in the Printers window.

This completes installation of the printer driver. Remove the CD-ROM from the
drive.

See “1.7.2 Printer Driver Properties” (P. 58) to configure the printer.

Store your CD-ROM in a safe place.

Summary of Contents for 8124



















































































































































































































































































































Search results

Summary of Contents for 8124

Reviews:

Related manuals for 8124

Brands by name

Popular brands

TallyGenicom 8124, User Manual

Search results

Summary of Contents for 8124

Reviews:

Related manuals for 8124

Brands by name

Popular brands