Super Systems SDS8120 Operation Manual Download

Page: 99 / 107

Super Systems Inc.

Page 99 of 107

Color Touch Screen Data Logger Operations Manual

Survey Window

You may receive deviation alarms depending on the current input and setpoint as well as the

alarm settings. The survey continues to run. It is simply providing you with the information on

the display.

You can view the input channel data on a number of different screens. The

Overview Display

option will display all channels on the device.

While the survey is running, several options are available: To stop the survey, select

Complete

Survey

from the Survey Control screen (which can be opened using the Survey option from the

main menu). Use

Mark Approach

to add a timestamp on when the furnace was heating up to its

target temperature. Use

Mark Survey Start

to mark when the survey began.

Survey Control Window (visible from the data logger during a survey)

Click

View Surveys

to view data on past surveys. Click

View Chart

to view the current chart of

data being logged.

Summary of Contents for SDS8120












































































































Search results

Summary of Contents for SDS8120

Reviews:

Related manuals for SDS8120

Brands by name

Popular brands

Super Systems SDS8120, Operation Manual

Search results

Summary of Contents for SDS8120

Reviews:

Related manuals for SDS8120

Brands by name

Popular brands