Super Systems Inc.
Page 55 of 107
Color Touch Screen Data Logger Operations Manual
Figure 69 - Viewing and Editing Individual TC Correction Factors
The TC correction factors are passcode protected in the
SDSReporter.ini
file contained in the
SDS Reporter installation folder (typically, the “C:\SSi\SDS” folder). The default passcode is 2.
To change it, open the
SDSReporter.ini
file and add this line in the [SETTINGS] block of the .ini
file:
PASSCODE=
x
Where
x
is zero or a positive integer.
The next tab is the Furnace tab (Figure 70), which contains the furnace ID, the make and model
of the furnace, the furnace type, the furnace use, the furnace’s operating range, the furnace
dimensions, the furnace class (newer versions only), and an optional image of the furnace.
