Super Systems SDS8120 Page 98 Operation Manual Download

Page: 98 / 107

Super Systems Inc.

Page 98 of 107

Color Touch Screen Data Logger Operations Manual

Edit Input Types

Using Survey Templates

If a survey has been run previously, the data logger will default to the last survey template used.

To modify the template being used, access the

Survey

menu option. This option contains the

survey information and the controls to perform a survey.

Choose the appropriate template from the drop-down menu in the top right-hand corner.

The Edit Template button allows for changes to be made to the selected survey. When editing a

survey, pressing OK will make changes only for that particular survey, while pressing Save will

permanently change the template.

The View Surveys button will display a list of previous surveys from the selected time range.

Starting a Survey

Once the template has been selected and any necessary edits have been made, press Start

Survey to begin. This will timestamp the selection and the data logger will log all channels that

have been selected for logging.

Summary of Contents for SDS8120












































































































Search results

Summary of Contents for SDS8120

Reviews:

Related manuals for SDS8120

Brands by name

Popular brands

Super Systems SDS8120, Operation Manual

Search results

Summary of Contents for SDS8120

Reviews:

Related manuals for SDS8120

Brands by name

Popular brands