Lifting and jacking up
DANGER
There is a risk to life if the truck tips over!
If not raised and jacked up properly, the truck may tip
over and fall off. Only the hoists specified in the
workshop manual for this truck are allowed and are
tested for the necessary safety and load capacity.
–
Only have the truck raised and jacked up by the
authorised service centre.
–
Only jack the truck up at the points specified in the
workshop manual.
The truck must be raised and jacked up for
various types of maintenance work. The au-
thorised service centre must be informed that
this is to take place. Safe handling of the truck
and the corresponding hoists is described in
the truck's workshop manual.
Working at the front of the truck
DANGER
Risk of accident due to an unsecured lift mast.
If the lift mast or fork carriage is raised, no work may
be performed on the lift mast or at the front of the
truck unless the appropriate safety measures are put
in place.
–
When securing, only use chains with sufficient
load-bearing capacity.
–
Contact the authorised service centre regarding
this matter.
CAUTION
Possibility of damage to the ceiling!
–
Note the maximum lift height of the lift mast.
Securing the lift mast against tilting
backwards
DANGER
Risk of accident!
This work must only be performed by an authorised
service technician.
–
To secure the lift mast against tilting back, contact
the authorised service centre.
Maintenance
5
Safety regulations for maintenance
442
56368011531 EN - 01/2021 - 05
Summary of Contents for 6219
