Still 6219, Original Instructions Manual

Page: 315 / 540

used, such as mirrors, a camera, a monitor
system etc.
–
Observe the following warning notices.
DANGER
Risk of fatal injury from falling load!
If attachments that hold the load by clamping it or ex-
erting pressure on it do not have a second method of
operating the function (lock), the load can work loose
and fall off.
–
Ensure that the second method of operating the
function (lock) is available.
–
When retrofitting such attachments, a second
method of operating the function (lock) must also
be retrofitted.
DANGER
Risk of fatal injury from falling load!
When installing a clamp with an integrated sideshift
function, ensure that the clamp does not open when
the sideshift is actuated.
–
Notify your authorised service centre before instal-
lation.
–
Never grab or climb on moving parts of the truck.
WARNING
Risk of accident due to incorrect labelling!
The use of attachments can cause accidents if the
labelling is incorrect or missing.
If the truck is not fitted with an attachment-specific
residual load capacity rating plate, and the operating
devices are not marked with the relevant pictograms,
the truck must not be used.
–
Use only CE-certified attachments that include op-
erating instructions and the required labels.
–
Arrange for an attachment-specific residual load
capacity rating plate to be fitted to the truck.
–
Arrange for the operating devices to be re-label-
led.
–
Arrange for the authorised service centre to adjust
the hydraulic system to the requirements of the at-
tachment (e.g. adjust the pump motor speed).
NOTE
If the required labelling is not provided with the
attachment, contact the authorised service
centre promptly.
Operation
4
Attachments
299 56368011531 EN - 01/2021 - 05