Still 6219, Original Instructions Manual

Page: 325 / 540

Controlling attachments using multi-
lever operation
In this version, the attachments (variant) are
controlled using the operating levers (1, 3).
The pictograms for the hydraulic func-
tions (2, 4) are affixed to the operating levers.
–
Observe the pictograms (2) or (4).
The pictograms are arranged according to the
directions of movement of the operating lev-
er (1) or (3).
The following applies:
–
Move the operating lever forwards.
The attachment moves in the direction of
movement shown in the upper part of the pic-
togram.
–
Move the operating lever backwards.
The attachment moves in the direction of
movement shown in the lower part of the pic-
togram.
–
Note the following attachment functions and
pictograms.
Picto-
gram Attachment function
Move the side shift frame or fork for-
wards
Move the side shift frame or fork
backwards
Move the sideshift to the left
Move sideshift to the right
Adjust fork arms: open
Adjust fork arms: close
Push off the load
Pull in the load
Rotate to the left
Rotate to the right
Tip shovel over
Tip shovel back
Swivel the fork to the left
Swivel the fork to the right
1 2 3 4

Operation
4
Attachments
309 56368011531 EN - 01/2021 - 05