Still 6219, Original Instructions Manual

Page: 479 / 540

Checking the seat belt
–
Pull out the belt (3) completely and check
for wear.
The belt must not be frayed or cut. The stitch-
ing must not be loose.
–
Check whether the belt is dirty.
–
Check whether parts are worn or damaged,
including the attachment points.
–
Check the buckle (1) to ensure that it locks
in properly.
When the belt tongue (2) is inserted, the belt
must be held securely.
–
The belt tongue (2) must release when the
red button (4) is pressed.
–
The automatic blocking mechanism must be
tested at least once a year:
–
Park the forklift truck on level ground.
–
Pull out the belt with a jerk.
The automatic blocking mechanism must
block extension of the belt.
–
Tilt the seat at least 30 ° (if necessary, re-
move the seat).
–
Slowly extend the belt.
The automatic blocking mechanism must
block extension of the belt.
Cleaning the seat belt
–
Clean the seat belt as necessary, but with-
out using chemical cleaning materials (a
brush will suffice).
Replacement after an accident
As a rule, the seat belt must be changed after
an accident.
6327_342-009
1
2
3

7090_342-005
1
4

Maintenance
5
Preserving operational readiness
463 56368011531 EN - 01/2021 - 05