Still 6219, Original Instructions Manual

Page: 525 / 540

Battery specifications
DANGER
There is a risk of explosion from using
a battery with the incorrect specifica-
tion!
Using batteries that do not correspond to
explosion-protection regulations may
lead to explosions in the surrounding at-
mosphere in potentially explosive areas!
–
Use only batteries that are approved
and tested for the place of use.
CAUTION
The battery weight and the battery dimensions affect
the stability of the truck.
When replacing the battery, the weight ratios must
not be changed. The battery weight must remain
within the weight range specified on the nameplate.
The location of ballast weights must not be changed.
The bottom of the battery tray must be closed.
–
Do not change the position of ballast weights.
–
Check the battery weight against the information
on the nameplate.
–
Only use a battery tray that is closed at the bot-
tom.
NOTE
The batteries for this truck are designed for
the special area of application. If a battery is to
be exchanged or replaced, use a structurally
identical explosion-protected battery with the
same characteristics. If a battery is replaced
with a battery of a different type, check that
the truck is permitted to be used in the corre-
sponding explosion-protection zones.
–
The battery weight can be found on the
nameplate of the battery.
Battery specifications according to DIN 43531; cells in accordance with DIN EN 60254-2, 48 V
circuit A or 48 V circuit B
Battery designa-
tion
Capacity
[Ah]
Circuit Weight/
ballast
weight [kg]
Battery compartment di-
mensions [mm]
Tray
Length Width Height
4PzV 400 400
A
708/
155
830 522 627 364
4PzV 440 440
4PzS 460 460
4PzS 500 500
Technical data
6
Battery specifications
509 56368011531 EN - 01/2021 - 05