Still 6219, Original Instructions Manual

Page: 329 / 540

Controlling attachments using a
double mini-lever
In this version, the attachments (variant) are
controlled using the "attachments" cross lev-
er (1). The adhesive label bearing the picto-
grams for the hydraulic functions (2) is affixed
at the designated point.
–
If the adhesive label becomes illegible or is
missing, please contact your authorised
service centre.
–
Observe the pictograms for the attachment
functions on the adhesive label (2).
The pictograms on the "attachments" cross
lever (1) show the respective functions that
are activated by this lever.
The pictograms are arranged according to the
direction of movement of the "attach-
ments" cross lever (1).
The following applies:
–
Move the "attachments" cross lever(1) in
the direction of arrow (A), (B), (C) or (D).
The attachment moves accordingly in the di-
rections (A), (B), (C) or (D) as shown in the
pictogram.
Picto-
gram Attachment function
Move the side shift frame or fork for-
wards
Move the side shift frame or fork
backwards
Move the sideshift to the left
Move sideshift to the right
Adjust fork arms: open
Adjust fork arms: close
Release load retainer
Clamp load retainer
Open clamps
Close clamps
Rotate to the left
Rotate to the right
Tip shovel over
Tip shovel back
2
6219_003-047_V2

Operation
4
Attachments
313 56368011531 EN - 01/2021 - 05