Still 6219, Original Instructions Manual

Page: 452 / 540

Measures to be implemented before de-
commissioning
–
Clean the truck thoroughly; see the chapter
entitled "Cleaning the truck".
–
Lift the fork carriage to the stop several
times.
–
Tilt the lift mast forwards and backwards
several times and, if fitted, move the attach-
ment repeatedly.
–
To relieve the strain on the load chains,
lower the fork onto a suitable supporting
surface, e.g. a pallet.
–
Check the hydraulic oil level.
–
Apply a thin layer of oil or grease to all un-
coated moving parts.
–
Lubricate the truck according to the "lubrica-
tion plan".
–
Lubricate the joints and actuators.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is disconnected while
the truck is switched on (under load), an electric arc
will be produced. This can lead to erosion of the con-
tacts, which considerably shortens the service life of
the contacts.
–
Switch off the truck before the battery male con-
nector is disconnected.
–
Do not disconnect the battery male connector
while the truck is switched on, except in an emer-
gency.
–
Disconnect the battery male connector.
–
Check the battery condition, acid level and
acid density.
–
Service the battery.
NOTE
Only store batteries that are fully charged.
–
Spray all exposed electrical contacts with a
suitable contact spray.
Operation
4
Decommissioning
436 56368011531 EN - 01/2021 - 05