Still 6219, Original Instructions Manual

Page: 385 / 540

Code Shown on display Cause/action
Switch off truck?
If the truck is switched off without having first
applied the parking brake, this message ap-
pears.
- Apply the parking brake.
Switch off truck any-
way?
If the truck is to be switched off although the
parking brake is not applied, this message ap-
pears.
- Secure the truck with wedges so that it cannot
roll away.
Truck stop: Access sys-
tem
The access authorisation (variant) is preventing
the use of the truck. This can be caused by en-
try of an incorrect code.
- Enable the access authorisation.
Fault: Battery
The truck control unit detects an error in the lith-
ium-ion battery.
- Switch the truck off and on again.
- If the message continues to appear, please
contact the authorised service centre.
Fault: Battery
The truck control unit detects an error in the lith-
ium-ion battery.
- Switch the truck off and on again.
- If the message continues to appear, please
contact the authorised service centre.
V7074
V7051
Mains voltage error
This message about the on-board charger is
triggered by different causes:
The fuse for the power supply has been trig-
gered.
There is a defect in the power supply.
There is a power failure.
- Re-establish the power supply.
When the power supply has been re-establish-
ed, the charging process resumes automatical-
ly.
Apply parking brake
If the truck control unit detects a movement of
the truck without the accelerator pedal being ac-
tuated, this message appears.
- Apply the parking brake.
Release parking brake
The desired action is only possible after releas-
ing the parking brake.
- Release the brake pedal.
Check parking brake
The truck control unit detects that the braking
force of the electric parking brake is reducing.
- Secure the truck with wedges so that it cannot
roll away.
- Contact your authorised service centre.
Operation
4
Display messages
369 56368011531 EN - 01/2021 - 05