Still 6219, Original Instructions Manual

Page: 316 / 540

Alternating operation using an electrical
switch valve
If non-integrated attachments for alternating
operation are used in conjunction with an elec-
trical switch valve for the 5th and 6th hydraulic
function, the electrical switch valve must oper-
ate at 12 V.
–
Contact the authorised service centre if
necessary.
Plug connectors on the lift mast
–
Before fitting the attachment, release the
pressure from the hydraulic system.
CAUTION
Risk of damage to components!
Open connections on the plug connectors (1) can be-
come dirty. Dirt can enter the hydraulic system. The
plug connectors can become stiff.
–
Once the attachment has been disassembled,
seal the plug connectors using the protective
caps.
Mounting attachments
Only competent persons are permitted to
mount and connect the energy supply to the
attachment.
–
Observe the information provided by the
manufacturer and supplier or sub-supplier
of the attachment when doing so.
–
After each installation, the function of the at-
tachment must be tested prior to initial com-
missioning.
NOTE
Please observe the definition of the following
responsible person: "competent person".
Load capacity with attachment
The permissible load capacity of the attach-
ment and the permissible load (load capacity
and load moment) of the truck must not be ex-
ceeded by the combination of the attachment
and the payload. Comply with the
6219_003-056
1

Operation
4
Attachments
300 56368011531 EN - 01/2021 - 05