Still 6219, Original Instructions Manual

Page: 523 / 540

Performance data
Model RX20-20P RX20-20PL
Type number 6230 6231
Driving speed with load (Blue-Q/
STILL Classic/sprint mode)
km/h 16/16/20 16/16/20
Driving speed without load (Blue-Q/
STILL Classic/sprint mode)
km/h 16/16/20 16/16/20
Lifting speed with load (Blue-Q/
STILL Classic/sprint mode)
m/s 0.45 0.45
Lifting speed without load (Blue-Q/
STILL Classic/sprint mode)
m/s 0.63 0.63
Lowering speed with load m/s 0.48 0.48
Lowering speed without load m/s 0.41 0.41
Pulling force with load N 4700 4800
Pulling force without load N 5000 5000
Max. pulling force with load N 11900 11900
Max. pulling force without load N 8200 8800
Climbing capability with load % 15 15
Climbing capability without load % 18.1 18.1
Max. climbing capability with load % 22.9 23.1
Max. climbing capability without
load
% 25.1 27.2
Acceleration time with load (Blue-Q/
STILL Classic/sprint mode)
s 5.8/5.5/5.3 5.8/5.5/5.3
Acceleration time without load
(Blue-Q/STILL Classic/sprint mode) s
5.4/5.1/4.8 5.4/5.1/4.8
Service brake
Electr. /
mech.
Electr. /
mech.
Gradients
The values specified in the "Performance da-
ta" table as the maximum climbing capability
can be used only to compare the performance
of forklift trucks in the same category. The
specified values in no way represent the nor-
mal daily operating conditions.
WARNING
To use the truck safely – with or without a load – the
maximum ascending or descending gradient permit-
ted for travel is 15%.
–
If you have any questions, contact your authorised
service centre.
Technical data
6
RX20-20 swing axle VDI datasheet
507 56368011531 EN - 01/2021 - 05