Still 6219, Original Instructions Manual

Page: 147 / 540

–
Switch on and check the function to be tes-
ted, e.g. lighting.
–
Press the back button to go back to the
Pre-Shift Check.
–
Answer the question based on the result of
the function check.
The next question appears.
NOTE
If no questions regarding the Pre-Shift Check
have been compiled, the question
Truck
ready for operation?
is displayed.
If the truck has to be moved for a test, e.g. for
a brake test, you can simply release the park-
ing brake. The message
To complete
Pre-Shift Check, press
is dis-
played. The truck can be moved at reduced
speed. If you apply the parking brake again,
the view goes back to the Pre-Shift Check.
At the end of the check, truck functions are re-
stricted if they have been adjusted as a reac-
tion to a negative test result. The message
Pre-Shift Check truck restric-
tions active
shows that truck functions
are restricted. As long as the truck functions
are restricted, no further Pre-Shift Check is re-
quested at the start of a new shift. The check
is only requested again after the fleet manager
has reset the restrictions.
All questions
The authorised service centre can use this question catalogue to put together the Pre-Shift Check
during commissioning:
Are the fork arms damaged (e.g. bent or cracked)?
Are the fork arms securely mounted and the locking devices un-
damaged?
Are the roller tracks on the lift mast sufficiently greased?
Are the load chains damaged?
Are the load chains sufficiently tensioned and loaded equally.?
Are all attachments securely mounted and undamaged? Are they in
working order?
Are operating fluids (e.g. oil, water, fuel) visibly leaking?
Are the wheels damaged? Are they worn beyond permissible limits?
0,0°
6,89 m
2,8 t
6219_003-266_V3_en
Pre-S
To complete
Pre-Shift Check,
press

Operation
4
Pre-shift check
131 56368011531 EN - 01/2021 - 05