Still 6219, Original Instructions Manual

Page: 386 / 540

Code Shown on display Cause/action
Parking brake cannot be
applied
The parking brake cannot be applied due to a
technical fault.
- Apply the parking brake according to the sec-
tion entitled "Malfunctions in the electric parking
brake".
- Secure the truck with wedges so that it cannot
roll away.
Parking brake cannot be
applied
The parking brake cannot be applied due to a
technical fault.
- Apply the parking brake according to the sec-
tion entitled "Malfunctions in the electric parking
brake".
- Secure the truck with wedges so that it cannot
roll away.
Apply parking brake via
button
The electric parking brake is not applying auto-
matically.
- Apply the parking brake by pressing the but-
ton.
Release parking brake via
button
The electric parking brake cannot be released
automatically.
- Release the parking brake by pressing the but-
ton.
Parking brake: Mainte-
nance required
The truck control unit detects that the electric
parking brake needs servicing.
- Secure the truck with wedges so that it cannot
roll away.
- Contact your authorised service centre.
Lower forks
This message appears e.g. for precision load
measurement (variant).
- Lower the fork carriage.
Lift height restriction
active
The lift height restriction (variant) is switched
on.
- Observe the heights of ceilings and entrances.
Close cab door or seat
belt
If the seat belt is not fastened and the cab door
(variant) is not closed, the driving speed is limi-
ted to 4 km/h and this message appears.
- Close the cab door or fasten the seat belt.
Close cab door
If the cab door is opened while the truck is in
motion, the truck brakes automatically to a
speed of 4 km/h.
- Close the cab door.
Configuration: Please
wait
This message is not displayed during normal
operation.
- Contact the authorised service centre.
Operation
4
Display messages
370 56368011531 EN - 01/2021 - 05