Still 6219, Original Instructions Manual

Page: 224 / 540

Automatically triggered actuation when the truck is stationary
Cause Effect
The driver's seat is vacated.
The electric parking brake will make a noise
when it is applied.
The LED (2) lights up with a steady light.
The accelerator pedal is released (brake pedal
not actuated).
After a specified delay, the electric parking
brake is applied with an audible sound.
The LED (2) lights up with a steady light.
The truck is held on a gradient by the traction
motor until the electric parking brake is applied.
The truck is switched off.
The electric parking brake is immediately ap-
plied with an audible sound.
The LED (2) will light up briefly with a steady
light until the control units switch off.
The emergency off switch is actuated.
The electric parking brake is immediately ap-
plied with an audible sound.
The LED (2) lights up with a steady light.
If the electric parking brake has applied auto-
matically, the symbol appears in the dis-
play-operating unit. The LED (2) lights up.
–
To release the electric parking brake, the
driver must sit down on the driver's seat
again.
–
Select a drive direction.
–
Press the accelerator pedal.
The electric parking brake will make a noise
when it is released. The LED (2) goes out.
NOTE
If the symbol appears in the display, the
truck cannot be driven until the electric parking
brake has been released by pressing the push
button (1). This is the case if the parking brake
has been applied manually.
6219_003-006_V2

Operation
4
Driving
208 56368011531 EN - 01/2021 - 05