Still 6219, Original Instructions Manual

Page: 177 / 540

Warning zone light (variant)
WARNING
Danger of damage to eyes from looking
into the warning zone light.
Do not look into the warning zone light.
Adjust the warning zone light so as not
to dazzle bystanders or the driver when
climbing in and out of the truck.
The warning zone light is mounted on sup-
ports on the overhead guard such that it is not
affected by jolts and vibrations. The warning
zone light projects a light bar next to the truck
on both the left-hand side and right-hand side
of the truck. These light bars indicate the dan-
ger areas to the sides of the truck while in op-
eration. See the section entitled "Danger area"
in the chapter entitled "Handling loads".
The warning zone light switches on and off
again together with the truck.
If the truck has StVZO (German Road Traffic
Licensing Regulations) equipment, the warn-
ing zone light can be switched on and off via
the display-operating unit.
–
To do so, push the softkey .
NOTE
If the truck is to be operated on public roads,
the warning zone light must be switched off.
–
Before using the truck, make sure that the
warning zone light is working and has been
adjusted correctly.
The distance from the light bar to the truck
must be between 70...75 cm.
–
To adjust the warning zone light, see the
section entitled "Adjusting the warning zone
light" in the chapter entitled "Preserving op-
erational readiness".
When ordering the truck, you can choose be-
tween a blue or red warning zone light.
6219_003-231

Operation
4
Lighting
161 56368011531 EN - 01/2021 - 05