Still 6219, Original Instructions Manual

Page: 69 / 540

Risks can include:
●
Escape of consumables due to leakages,
rupture of lines and containers etc.
●
Risk of accident when driving over difficult
ground such as gradients, very smooth or
uneven surfaces, or with poor visibility etc.
●
Falling, tripping etc. when moving on the
truck, especially in wet weather, with leak-
ing consumables or on icy surfaces
●
Fire and risk of explosion caused by batter-
ies, electrical voltages and static discharges
through clothing
●
Spark formation caused by truck parts (lift
mast, chassis, rear weight) striking against
part of the building (gates, racking etc.)
●
Human error resulting from failure to ob-
serve the safety regulations
●
Unrepaired damage or defective and worn
components
●
Insufficient maintenance and testing
●
Use of incorrect consumables
●
Exceeding test intervals
The manufacturer shall not be liable for acci-
dents involving the truck caused by the failure
of the operating company to comply with these
regulations either intentionally or due to negli-
gence.
Stability
The stability of the truck has been tested to
the latest technological standards and is guar-
anteed provided that the truck is used properly
and according to its intended purpose. These
standards only take into account the dynamic
and static tipping forces that can arise during
specified use in accordance with the operating
rules and intended purpose. However, the
danger of exceeding the moment of tilt due to
improper use or incorrect operation and losing
stability can never be excluded.
The loss of stability can be avoided or mini-
mised by the following actions:
–
Always secure the load against slipping,
e.g. by lashing.
–
Always transport unstable loads in suitable
containers.
–
Always drive slowly when cornering.
Safety
2
Residual risk
53 56368011531 EN - 01/2021 - 05