manualshive.com logo in svg

StarTech.com IES101002SFP, Instruction Manual

Share
Download
StarTech.com IES101002SFP Instruction Manual Download Page 98

Instruction Manual

90

Menu option

Description

EtherType for 

Custom S-ports

Specify the EtherType used for Custom S-ports. This is a global 

setting for all the Custom S-ports.

Port

Specify the logical port number of this row.

Port Type

Specify the port type: Unaware, Customer port (C-port), 

Service Port (S-port), Or Custom Service port (S-custom-port).
If the Port Type is Unaware, all frames are classified to the Port 

VLAN ID and tags are not removed.

Ingress filtering

Enable ingress filtering on a port. This parameter affects 

VLAN ingress processing. If you enable ingress filtering and 

the ingress port is not a member of the classified VLAN of the 

frame, the frame is discarded. By default, ingress filtering is 

disabled.

Frame Type

Specify whether the port accepts all frames or only tagged 

or untagged frames. This parameter affects VLAN ingress 

processing. If the port only accepts tagged frames, untagged 

frames received on this port are discarded.

Port VLAN mode

Configure VLAN mode to “None” or Specific.”
None: a VLAN tag with classified VLAN ID is inserted in frames 

transmitted on the port.This mode is normally used for ports 

connected to VLAN-aware switches.
Specific: a Port VLAN ID can be configured.
Untagged frames received on the port are classified to 

the Port VLAN ID. If VLAN awareness is disabled, all frames 

received on the port are classified to the Port VLAN ID. If 

the classified VLAN ID of a frame transmitted on the port is 

different from the Port VLAN ID, a VLAN tag with the classified 

VLAN ID is inserted in the frame.

Port VLAN ID

Specify the VLAN identifier for the port (range is from 1 to 

4095, and the default is 1).

Note:

 The port must be a member of the same VLAN as the 

Port VLAN ID.

Tc Tag

Specify the egress tagging of a port. Untag_pvid - All VLANs 

except the configured PVID are tagged. Tag_all - All VLANs are 

tagged. Untag_all - All VLANs are untagged.

Summary of Contents for IES101002SFP



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands