manualshive.com logo in svg

StarTech.com IES101002SFP, Instruction Manual

Share
Download
StarTech.com IES101002SFP Instruction Manual Download Page 81

Instruction Manual

73

Change the IGMP Snooping Configuration settings

Multicasting is used to support real-time applications such as video-conferencing or 

streaming audio. A multicast server doesn’t have to establish a separate connection 

to each client; it only broadcasts its service to the network. Using this approach will 

significantly increase broadcast traffic on the network. This switch can use IGMP to 

filter multicast traffic. IGMP snooping can be used to passively monitor or snoop the 

packets exchanging between multicast hosts and clients. Then it can set its filters. You 

can use the IGMP Snooping Configuration page to configure Global and Port Related 

settings to control the forwarding of multicast traffic. This can decrease broadcast 

traffic to improve the network performance.
You can access the screen by clicking 

Configuration

 > 

IPMC

 > 

IGMP Snooping

 > 

Basic Configuration

.

Menu option

Description

Global Configuration

Snooping 

Enabled

Control whether the IGMP snooping is enabled.

Unregistered 

IPMCv4 

Flooding 

Enabled

Enable unregistered IPMCv4 traffic flooding. The flooding control 

takes effect only when IGMP Snooping is enabled. When IGMP 

Snooping is disabled, unregistered IPMCv4 traffic flooding is 

always active in spite of this setting.

IGMP SSM 

Range

SSM (Source-Specific Multicast) Range allows the SSM-aware 

hosts and routers to run the SSM service model for the groups in 

the address range.

Leave Proxy 

Enable

Enable IGMP Leave Proxy. This feature can be used to avoid 

forwarding unnecessary leave messages to the router side.

Proxy Enabled

Enable IGMP Proxy. This feature can be used to avoid forwarding 

unnecessary join and leave messages to the router side.

Port Related Configuration

Port

Port identifier.

Router Port

Specify which ports act as router ports. A router port is a port 

on the Ethernet switch that leads towards the Layer 3 multicast 

device or IGMP querier. If an aggregation member port is 

selected as a router port, the whole aggregation will act as a 

router port.

Fast Leave

Enable the fast leave on the port.

Summary of Contents for IES101002SFP



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands