Instruction Manual
149
Buttons
Auto-refresh: Select the Auto-refresh check box to
automatically refresh the page at regular intervals.
Refresh: Updates the system log entries, starting from the
current entry ID.
<< : Updates the table starting with the first entry in the
IGMP group table.
<<: Updates the table starting with the entry after the last
entry current displayed.
1. To display the group port members, on the main screen of the Web management UI,
click
Monitor
>
IPMC
>
IGMP Snooping
>
Groups
.
Change the IPv4 SFM Information settings
Entries in the IGMP SFM Information Table are shown on this page. The IGMP SFM
(Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific
Multicast) Information. This table is sorted first by VLAN ID, then by group, followed by
port. Different source addresses belonging to the same group are treated as a single
entry.
You can access the screen by clicking
Monitor
>
IPMC
>
IGMP Snooping
>
Groups
Information
.
Menu option
Description
VLAN ID
Indicates the VLAN ID of the entry.
Group
Indicates the group address of the displayed group.
Port
Indicates the switch port number.
Mode
Indicates the filtering mode maintained per (VLAN ID, port
number, Group Address) basis. It can be
Include
or
Exclude
.
Source Address
Indicates the IP Address of the source. Currently, the system
limits the total number of IP source addresses for filtering to
128.
Type
Indicates the Type:
Allow
or
Deny
.
Hardware Filter/
Switch
Indicates whether the data plane destined to the specific
group address from the source IPv4 address could be handled
by the chip or not.
