Instruction Manual
32
Option
Description
Client
Specify the authentication method for the administrator.
Authentication Method Select 1 of 4 authentication methods.
Fallback
Set the switch to check by local password if fallback is
checked when radius server authentication fails.
1. On the main screen of the Web management UI, click
Configuration
>
Security
>
Switch
>
Auth Methods
.
2. For any of the client types, do the following:
• To disable access via specified management interface, in the
Authentication
Method
drop-down list, click
None
.
• To check by password, in the
Authentication Method
drop-down list, click
Local
.
• To authenticate using the RADIUS server, in the
Authentication Method
drop-
down list, click
RADIUS
.
• To authenticate using the server, in the
Authentication Method
drop-
down list, click
.
3. If necessary, select the
Fallback
check box for any of the client types.
4. To save your changes, click
Save
.
To restore the previous settings, click
Reset
.
Set up the Secure Shell management interface
On the SSH Configuration screen, you can enable SSH. SSH service on this switch only
supports password authentication. It can be authenticated by RADIUS, , or
locally.
1. On the main screen of the Web management UI, click
Configuration
>
Security
>
Switch
>
SSH
.
2. Do one of the following:
• To enable SSH, in the
Mode
drop-down list, click
Enabled
.
• To disable SSH, in the
Mode
drop-down list, click
Disabled
.
3. To save your changes, click
Save
.
To restore the previous settings, click
Reset
.
