Instruction Manual
77
2. Compile the MLD-related parameters.
3. To save your settings, click
Save
.
To restore the previous settings, click
Reset
.
Change the VLAN Configuration settings
Use the MLD Snooping VLAN Configuration screen to configure MLD snooping and
query for a VLAN interface.
You can access the screen by clicking
Configuration
>
IPMC
>
MLD Snooping
>
VLAN Configuration
.
Menu option
Description
Delete
Check to delete the entry. The designated entry will be
deleted during the next save.
VLAN ID
The VLAN ID of the entry.
MLD Snooping
Enabled
Enable per-VLAN MLD Snooping. Up to 32 VLANs can be
selected for MLD Snooping.
MLD Querier
Compatibility
Enable the IGMP Querier in the VLAN
Compatibility is maintained by hosts and routers taking
appropriate actions depending on the versions of MLD
operating on hosts and routers within a network. The allowed
selection is “MLD-Auto”, “Forced-MLDv1”, and “Forced MLDv2”.
The default compatibility value is “MLD-auto”.
RV
Robustness Variable. The Robustness Variable allows tuning
for the expected packet loss on a link. The allowed range is 1
to 255, default robustness variable value is 2.
QI
Query Interval. The Query Interval is the interval between
General Queries sent by the Querier. The allowed range is 1 -
31744 seconds, default query interval is 125 seconds.
QRI
Query Response Interval. The maximum Response Delay used
to calculate the Maximum Response Code inserted into the
periodic General Queries. The allowed range is 0 to 31744 in
tenths of seconds, default query response interval is 100 in
tenths of seconds (10 seconds).
