manualshive.com logo in svg

StarTech.com IES101002SFP, Instruction Manual

Share
Download
StarTech.com IES101002SFP Instruction Manual Download Page 25

Instruction Manual

17

To access the menu options, on the left side of the main screen of the Web 

management UI, click 

Monitor

 > 

Security

 > 

Network

 > 

Port Security

 > <

menu 

option

>.

Menu option

Description

Switch

View the module legend and the status of each port, including the 

MAC address learning and the maximum allowed MAC count.

Port

View the MAC address, VLAN ID, state, time of addition, and the age 

and hold of the timer for each port.

To access the menu options, on the left side of the main screen of the Web 

management UI, click 

Monitor

 > 

Security

 > 

Network

 > 

NAS

 > <

menu option

>.

Menu option

Description

Switch

View the authentication service status and information for 

each port.

Port

View the authentication statistics, port status, and 

authentication method.

To access the menu options, on the left side of the main screen of the Web 

management UI, click 

Monitor

 > 

Security

 > 

Network

 > <

menu option

>.

Menu option

Description

ACL Status

View the ACL status by different ACL users.

ARP Inspection

View the dynamic ARP inspection table, sorted by port 

number, VLAN ID, MAC address, and IP address.

IP Source Guard

View the IP Source Guard table, sorted by port number, 

VLAN ID, and IP address.

To access the menu options, on the left side of the main screen of the Web 

management UI, click 

Monitor

 > 

Security

 > 

Network

 > 

DHCP

 > <

menu option

>.

Menu option

Description

Snooping Statistics

View the statistics for each packet type.

Relay Statistics

View the DHCP relay statistics.

Summary of Contents for IES101002SFP



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands