Instruction Manual
33
Enable HTTPS
On the HTTPS Configuration screen, you can enable or disable HTTPS and Automatic
Redirect mode. When Automatic Redirect mode is enabled, the Web browser is
automatically redirected to an HTTPS connection when both HTTPS and Automatic
Redirect modes are enabled.
1. On the main screen of the Web management UI, click
Configuration
>
Security
>
Switch
>
HTTPS
.
2. Do one of the following:
• To enable HTTPS, in the
Mode
drop-down list, click
Enabled
.
• To disable HTTPS, in the
Mode
drop-down list, click
Disabled
.
3. If HTTPS is enabled, do one of the following:
• To enable Automatic Redirect, in the
Mode
drop-down list, click
Enabled
.
• To disable Automatic Redirect, in the
Mode
drop-down list, click
Disabled
.
4. To save your changes, click
Save
.
To restore the previous settings, click
Reset
.
Configure the access management settings
On the Access Management Configuration screen, you can create a list of up to 16
IP addresses or IP address groups that allow access management through the HTTP/
HTTPS/SNMP/TELNET/SSH.
1. On the main screen of the Web management UI, click
Configuration
>
Security
>
Switch
>
Access Management
.
2. Do one of the following:
• To enable access management, in the
Mode
drop-down list, click
Enabled
.
• To disable access management, in the
Mode
drop-down list, click
Disabled
.
3. If access management is enabled, click
Add New Entry
.
4. Set up a list of rules for HTTP/HTTPS, SNMP, TELNET/SSH.
5. To save your changes, click
Save
.
To restore the previous settings, click
Reset
.
