Instruction Manual
52
Change the Ports settings
On the ACL Ports Configuration screen, you can specify the assigned port reactions
when specific frames are matched. These behaviors include
Port Redirect
,
Mirror
,
Logging
, and
Shutdown
.
To access the
ACL Ports Configuration
screen, click
Configuration
>
Security
>
Network
>
ACL
>
Ports
.
Menu option
Description
Port
Identifies the port to which the settings contained in the same
row will apply.
Policy ID
Specify the Policy ID to apply to this port (range: 0 to 255).
Action
Permit or deny the forwarding if policy is Matched. (
Permit
selected by default.)
Rate Limiter ID
Specify a Rate Limiter ID. The mapping table is on the
Rate
Limiters
page.
Disabled
by default. Value range: 1 to 16.
Port Redirect
Select the port to which frames are redirected. Allowed values are
Disabled
(default value) or a
specific port number
. This value
can’t be set when
Action
is permitted.
Mirror
Specify the operation of this port. The allowed values are:
[Enabled]
Frames received on the port are mirrored.
[Disabled]
Frames received on the port are not mirrored. The default value
is
Disabled
.
Shutdown
Specify the operation of this port. The allowed values are:
[Enabled]
If a frame is received on the port. The port will be disabled.
[Disabled]
Port shutdown is disabled. The default value is
Disabled
.
State
Specify the port state of this port. The allowed values are:
[Enabled]
To reopen ports by changing the volatile port configuration of
the ACL user module.
[Disabled]
To close ports by changing the volatile port configuration of the
ACL user module. The default value is
Enabled
.
Counter
Counts the number of frames that match this ACE.
