Instruction Manual
102
1. On the main screen of the Web management UI, click
Configuration
>
QoS
>
Port
Tag Remarking
.
2. On the
Overview
screen, click the port number for the
Tag Remarking
settings for
each specific port.
3. To apply your changes, click
Save
.
To restore the previous settings, click
Reset
.
Change the Port DSCP settings
Use the QoS Port DSCP Configuration page to configure Ingress translation and
classification settings and Egress re-writing of Differential Services Code Point (DSCP)
values.
You can access the screen by clicking
Configuration
>
QoS
>
Port DSCP
.
Menu option
Description
Port
The Port column shows the list of ports thatyou can configure
DSCP Ingress and Egress settings for.
Ingress
In Ingress settings, you can change Ingress translation and
classification settings for individual ports. There are two
configuration parameters available in Ingress:
1. Translate
2. Classify
[Translate]
To enable the Ingress Translation, select the check box.
[Classify]
The classification for a port can have four different values:
Disable: No Ingress DSCP Classification
DSCP=0: Classify if incoming (or translated, if enabled) DSCP
value is 0.
Selected: Classify only the selected DSCP values for which
classification is enabled as specified in the DSCP Translation
settings.
All: Classify all DSCP values.
