Instruction Manual
63
IP address
The IP Address can be used to calculate the destination port for
the frame. Select to enable the use of the IP Address, or unselect
to disable. By default, IP Address is enabled.
TCP/IP port
number
The TCP/IP port number can be used to calculate the destination
port for the frame. Select to enable the use of the TCP/IP Port
Number, or unselect to disable. By default, TCP/UDP Port Number
is enabled.
Aggregation Group Configuration
Group ID
Indicates the group ID for the settings contained in the same row.
Group ID “Normal” indicates there is no aggregation. Only one
group ID is valid per port.
Port members
Each switch port is listed for each group ID. Select a radio button
to include a port in an aggregation, or clear the radio button
to remove the port from the aggregation. By default, no ports
belong to any aggregation group. Only full duplex ports can join
an aggregation and ports must be in the same speed in each
group.
1. On the main screen of the Web management UI, click
Configuration
>
Aggregation
>
Static
.
2. In the section titled
Hash Code Contributors
, configure the desired load-balancing
method using the provided check boxes. Parameters include
Source MAC Address
,
Destination MAC Address
,
IP Address
, and
TCP/UDP Port Number
.
3. Assign port members to their specific trunking group.
4. To save your settings, click
Save
.
To restore the previous settings, click
Reset
.
Change the LACP settings
Using the
LACP Port Configuration
screen, you can enable LACP on selected ports,
and also configure key and LACP mode.
To locate the screen, click
Configuration
>
Port Trunking
>
Static
.
Menu option
Description
Port
Port identifier.
