Instruction Manual
94
[For SNAP]
a. OUI: OUI (Organizationally Unique Identifier) is a value
in the format xx-xx-xx where each pair (xx) in the string is a
hexadecimal value, ranging from 0x00-0xff.
b. PID: If the OUI is the hexadecimal 000000, the protocol ID
is the Ethernet type (EtherType) field value for the protocol
running on top of SNAP. If the OUI is an OUI for a particular
organization, the protocol ID is a value assigned by that
organization to the protocol running on top of SNAP.
In other words, if the value of the OUI field is 00-00-00, then
the value of PID will be the EtherType (0x0600-0xffff). And if
the value of OUI is other than 00-00-00, then a valid value for
PID will be any value from 0x000 to 0xffff.
Group Name
A valid Group Name is a unique 16-character-long string,
consisting of a combination of letters (a-z or A-Z) and integers
(0-9).
Note:
Special characters and underscores (_) are not allowed.
1. On the main screen of the Web management UI, click
Configuration
>
VCL
>
Protocol-Based VLAN
>
Protocol to Group
.
2. To add a new entry, click
Add New Entry
.
3. Select the
Frame Type
,
Etype value
, and
Group Name
.
4. To save your settings, click
Save
.
To restore the previous settings, click
Reset
.
Change the Group to VLAN settings
The Group Name to VLAN Mapping Table allows you to add new protocols to Group
Name (unique for each group) mapping entries, as well as allow you to see and delete
already mapped entries for the switch.
You can access the screen by clicking
Configuration
>
VCL
>
Protocol-based VLAN
>
Group to VLAN
.
Menu option
Description
Delete
To delete a Group Name map entry, check this box. The entry
will be deleted on the switch during the next Save.
