Instruction Manual
129
Action
Indicates the forwarding action of the ACE.
Permit: Frames matching the ACE may be forwarded and
learned.
Deny: Frames matching the ACE are dropped.
Rate Limiter
Indicates the rate limiter number of the ACE.
The allowed range is 1 to 16. When a
Disabled
message is
displayed, the rate limiter operation is disabled.
Port Redirect
Indicates the port redirect operation of the ACE.
Indicates frames matching the ACE are redirected to the port
number. The allowed values are
Disabled
or a specific port
number. When a
Disabled
message is displayed, the port
redirect operation is disabled.
Mirror
Specify the mirror operation of this port.
The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is
Disabled
.
CPU
Indicates the forward packet that matched the specific ACE
to CPU.
CPU Once
Indicates the forward first packet that matched the specific
ACE to CPU.
Counter
Indicates the number of times the ACE was hit by a frame.
Conflict
Indicates the hardware status of the specific ACE. The specific
ACE was not applied to the hardware due to hardware
limitations.
Buttons
In the QCL status drop-down list, click a status.
Auto-refresh: Select this check box to automatically refresh
the page. Automatic refresh occurs at regular intervals.
Refresh: Updates the system log entries, starting from the
current entry ID.
1. On the main screen of the Web management UI, click
Monitor
>
Security
>
Network
>
ACL Status
.
2. In the drop-down list, click a software module.
