Sony RM-NX7000 Navitus, Operating Instructions Manual

Page: 136 / 252

136
Continued
Macro operation using the Timer function
4 Press the [OK] key.
The setting of the macro procedure is
complete and the display returns to the
Timer display (step 3 on page 129).
To finish the setting
Press the COMMANDER OFF button for 2 seconds or longer. The display returns
to the Home display. The setting finishes.
Notes
• A Timer program key can have only one Timer macro. If you want to set a component to
turn on at a programmed time, and to set the component to turn off at another time,
program two Timer macros separately.
• According to the status of the component operated by the Timer macro, the next
program might not work successfully. When setting a Timer macro, check carefully the
setting contents of other Timer macros.
• While a Timer program is working, if the set time for another Timer program is reached,
the Timer program starts after the current program finishes.
About the execution time of the macro procedure you have set for the
timer macro
The execution of the timer macro starts from the first operation step (action)
programmed for the macro procedure. Because it may take some time before the
last operation step is executed depending on the contents of the macro
procedure, the last operation step may start later than the programmed time.
Therefore, set the time regarding the contents of the macro procedure, etc., when
setting the timer.