Sony RM-NX7000 Navitus, Operating Instructions Manual

Page: 135 / 252

135
Convenient oper
ations by pr
ogr
amming a
series of actions (macr
o) for a key/button
Step 3: Programming a macro
In this Step, how to set a macro is explained.
1
Press the [MACRO] tag.
2 Press a Timer program key
you want to program a
macro for.
If you select a Timer program key
already programmed with a macro
The message for confirmation of deleting
a macro appears. Press the [YES] key to
overwrite the macro. If you press the
[NO] key, the display returns to the
previous one without overwriting.
3
Set a macro procedure.
For details on setting a macro, see steps 1
- 4 in “Step 2: Setting a macro” (pages
120 - 121).
Note
For the macro setting to the Timer program
key, the procedure of the [JUMP] key cannot
be set.
z
Tip
You can program up to 128 steps (actions) for one Timer program key. However,
the number of steps (actions) you can program may be less than 128 depending on
the free memory capacity of the Remote Commander.
Continued