manualshive.com logo in svg

Sony RM-NX7000 Navitus, Operating Instructions Manual

The Sony RM-NX7000 Navitus Software Manual is a comprehensive guide that provides in-depth instructions on operating and maximizing the potential of your Navitus system. This manual can be easily downloaded for free from manualshive.com, enabling you to access the wealth of information and enhance your user experience effortlessly.

Share
Download
background image

227

Remote Commander’

s Other Functions

Displaying image files set as wallpapers

Using the Wall Album function, you can browse image files set as wallpapers for
the Remote Commander with “NAVITUS Design.”

1

Press the [APP] key for 2 seconds or longer in the
Home display.

The Application display appears.

2

Press the 

 (Wall Album) key.

The image files set as wallpapers using “NAVITUS Design” are shown
sequentially in alphabetical order.

z

 Tip

If you want to close the application display, press the [EXIT] key to return to the
Home display.

3

Press the NEXT/BACK button to see the next/
previous image.

z

 Tip

If you press the COMMANDER OFF button, the display returns to step 2.

4

Press the COMMANDER OFF button for 2 seconds
or longer after checking the wallpapers.

The display returns to the Home display.

To browse wallpapers continuously in step 3 (slide show)

Press the NEXT/BACK button for 2 seconds or longer. A slide show starts in the
forward direction when the NEXT button is pressed, and in the backward
direction when the BACK key is pressed. Each image is shown for 5 seconds. To
stop the slide show, press the NEXT/BACK button again.

If there is no file to be shown

“No files to be displayed” appears in the display. Press the [OK] key, and the
display returns to the Application display.

4

When cleaning is complete, press the
COMMANDER OFF button for 2 seconds or longer.

The display returns to the Home display.
Or you can also return to the Home display by pressing the [EXIT] key.

Summary of Contents for RM-NX7000 Navitus





























































































































































































































































Reviews:

No comments

Related manuals for RM-NX7000 Navitus

Nidec Leroy-Somer R180 Installation And Maintenance Manual preview
Leroy-Somer R180
Brand: Nidec Pages: 20
Gardena 4040 Operating Instructions Manual preview
4040
Brand: Gardena Pages: 100
IBM 1710 Manual preview
1710
Brand: IBM Pages: 72
ICP DAS USA MDC-700 Series Quick Start preview
MDC-700 Series
Brand: ICP DAS USA Pages: 4
ICP DAS USA I-7080 Quick Start Manual preview
I-7080
Brand: ICP DAS USA Pages: 6
ICP DAS USA EIP-2000 Series Faq preview
EIP-2000 Series
Brand: ICP DAS USA Pages: 19
Xantrex Trace C35 Installation And Operation Manual preview
Trace C35
Brand: Xantrex Pages: 56
Xantrex TrueCharge 2 Owner'S Manual preview
TrueCharge 2
Brand: Xantrex Pages: 2
Xantrex Freedom Sequence Owner'S Manual preview
Freedom Sequence
Brand: Xantrex Pages: 58
Xantrex Freedom e-GEN Checklist preview
Freedom e-GEN
Brand: Xantrex Pages: 4
Xantrex AGS Owner'S Manual preview
AGS
Brand: Xantrex Pages: 20
WAREMA LONMSE 2M230I Operating And Installation Instructions preview
LONMSE 2M230I
Brand: WAREMA Pages: 4
+GF+ EA15 Instruction Manual preview
EA15
Brand: +GF+ Pages: 3
Össur ICELOCK 551 Instructions For Use Manual preview
ICELOCK 551
Brand: Össur Pages: 58
iluminize 5110 V1 Manual preview
5110 V1
Brand: iluminize Pages: 2
Linear Technology LT8570 Demo Manual preview
LT8570
Brand: Linear Technology Pages: 7
YASKAWA J1000 CIMR-JC series Installation Manual preview
J1000 CIMR-JC series
Brand: YASKAWA Pages: 25
Automated Logic UNI/32 Technical Instructions preview
UNI/32
Brand: Automated Logic Pages: 10

Brands by name

Popular brands

Load more brands