Sony RM-NX7000 Navitus, Operating Instructions Manual

Page: 203 / 252

203
Using a
“Memory Stick”
After the “Memory Stick” confirmation display, the following displays
appear according to the contents in the “Memory Stick.”
■
In case of all environment
data:
The confirmation display for updating
all environmental data appears.
■
In case of preset data and its
image data:
The confirmation display for updating
preset data appears.
■
In case of component unit
data:
The confirmation display for adding
component unit data appears.
Notes on reading data as component unit data
• Do not replace a “Memory Stick” with another one while a message appears. It
causes a malfunction. If you want to replace a “Memory Stick”, press the [NO]
key to return to step 2, and then replace it.
• If an Alias Component key is added as component unit data, the Alias
Component key is added as an Empty key. Therefore, the operation display
cannot be displayed, even if you press the added Alias Component key in the
operation mode of the Remote Commander.
• If you add a Component key of the same label name as a Component key that
exists on the Remote Commander, the label name of the added Component key
is shown with a digit added. (Example: If you add a Component key of the label
name [TV], the label name of the added Component key is shown as [TV2] on
the Remote Commander.)
Continued