background image

48

Transportation and packaging

  Cha

p

ter

 3

  Se

rv

ic

ing

Transportation and 
packaging

If the server, or any component part of the server, has to be 
returned to your Sony representative for repair or further 
investigation, please ensure that it is adequately packaged. 
Sony cannot be held liable for goods that are inadequately 
packaged and damaged in transit.

If the original packaging is not available, please use a 
suitable replacement.

Returning parts to your Sony 
representative

If parts are to be returned to your local Sony representative 
for repair or further investigation, please ensure that they 
are adequately cushioned and packaged. Ensure that anti-
static packaging is used for circuit boards and parts that 
require protection from electrostatic discharge.

Returning the server to your Sony 
representative

Please use the original packaging to protect the server from 
damage during transit. 

In addition to providing external packaging for the server, 
ensure that the Media RAID HDDs cushioning blocks are 
re-inserted, and that the PCI card cushioning block is re-
inserted to protect these items from possible vibration and 
damage (see the 

HDXS-C200

 

Installation Manual

 for 

details).

Summary of Contents for HDXS-C200











































































































Reviews: