45
Inserting Titles
Bas
ic
Ope
rat
ions
When you select a title in the [Title 1] list, the title
appears in the [NEXT] viewer.
To adjust the appearance of composites
When you select the title you want to adjust in the
[Title 1] list, the [Title 1] tab appears in the sub
screen. Tap the [Title 1] tab to display the [Title 1]
screen, and drag the sliders to perform adjustments.
[Clip]:
Adjust the amount of background loss (i.e.,
clip value) within a range of 0.00 to 100.00.
[Gain]:
Adjust the sharpness of outlines (i.e., gain
value) within a range of –100.00 to +100.00.
[Density]:
Adjust the transparency of the title within
a range of 0.00 to 100.00.
Depending on the values configured for each setting,
the title may not be displayed. In such cases, tap
[Reset] to restore the original state, and perform
adjustment again.
4
Tap .
The [Title 1] list closes, and the [Option] menu
appears again.
The thumbnail of the selected title appears on the
[Title 1] button.
Tapping the button again removes the title display
(i.e., the title will be in its disabled state).
Tip
Select the title you want to insert.
If the image includes an alpha channel,
a checkered pattern appears in the
areas where the background image will
be displayed.
Enabled
Displayed
Summary of Contents for AWS-750
Page 121: ......
