47
Controlling Remote Cameras
Bas
ic
Ope
rat
ions
Controlling Remote
Cameras
You can perform the following controls for cameras
connected to the unit via VISCA cable.
• Controlling and adjusting cameras (page 47)
• Saving adjustments as presets (page 49)
• Recalling presets (page 50)
• Lighting tallies on remote cameras (page 51)
To control a camera, you must assign the VISCA camera
as an input source in the [Input] list and perform
configurations to enable remote control beforehand. For
details, see “Remote Camera Connections and Settings”
(page 93).
• Use the remote controller of the camera to configure
setting items that cannot be configured from the unit. If
you change the settings, be sure to restart the camera.
• Camera movement and behavior will vary depending
on the camera model.
• When a camera is turned on, it starts up according to the
settings stored in [Preset_1]. If you want to recall
current pan/tilt positions and other camera conditions
the next time you start up the camera, be sure to save
them to [Preset_1] before turning off the camera.
Controlling Cameras
1
In the [Input] list of the main screen, select the camera
input source you want to control and display its video
in the [NEXT] viewer.
The [Camera] tab appears in the sub screen.
2
Tap the [Camera] tab.
The [Camera] screen appears.
Enabled
Displayed
Tips
Summary of Contents for AWS-750
Page 121: ......
