20
Applying the Anti-Glare Films
Ov
erv
iew
Placement
Center the film so that the surrounding uncovered
edges of the display are even.
If you place the film all the way to the edge of either
side, the film may shift as you are applying it to the
display, resulting in misalignment.
4
Use vinyl tape to affix the anti-glare film to the right
side of the display.
5
Flip the anti-glare film over, and use the screen-
cleaning solution and cleaning cloth to wipe off any
dust.
Wipe in a single direction from right to left.
Verify that all specks of dust have been removed from
the surface of the main display.
6
Place the anti-glare film back on the main display.
7
Peel off a portion of the backing sheet from the anti-
glare film on the side with the vinyl tape (i.e., the
inside), and use the cleaning cloth to slowly smooth
out any air bubbles, starting from the center of the
right side.
Apply the film while gradually peeling the backing
sheet.
If air bubbles or leftover dust occur
• Remove the anti-glare film up to the location of the
air bubble or leftover dust, and remove the air or
dust as you reapply the film. In such cases, do not
remove the entire film. You will not be able to
reapply the film if you do so.
• If specks of dust are attached to the adhesive
surface of the anti-glare film, use the adhesive
surface of vinyl tape to remove them.
8
When the anti-glare film is fully applied, firmly rub
the edges of the film.
Note
Leave about 1 mm (
1
/
16
in.) of
space evenly around the edges.
Anti-glare film
Fold the tape to affix it to the side.
First apply the tape to the top surface.
Summary of Contents for AWS-750
Page 121: ......
