Sony AWS-750, Operating Instructions Manual

Page: 19 / 121

19
Applying the Anti-Glare Films
Ov
erv
iew
Closing the Main Display
1
Hold the sides of the main display as illustrated, and
pull the display in the direction of the arrow.
The magnet locks will release.
2
Slide the main display to the position illustrated, and
push the display in the direction of the arrows to lock
it into place.
Make sure that the four hooks (two each on the right
and left sides) are secure and that the main display
does not open.
3
Close the panel cover.
4
Push in the direction of the arrows to lock the panel
cover onto the main display.
Applying the Anti-Glare
Films
Anti-glare films are supplied with this unit to protect the
touchscreen displays.
Apply the anti-glare films in a dust-free environment to
prevent dust from sticking to the films due to static
electricity. In addition, apply the films in a well-lit
environment so that you can see if air bubbles form.
• The anti-glare films cannot be reapplied once they are
applied. Apply the anti-glare films with great care.
• Any dust left on the touchscreen surface will result in
air bubbles.
Items to prepare
• Screen-cleaning solution
• Cleaning cloth (non-woven)
• Vinyl tape (3 cm (1
3
/
16
in.) or more in width)
Applying the film to the main display
1
If the protective sheet from the factory is still
attached, remove it.
2
Use the screen-cleaning solution and cleaning cloth
to clean the main display and remove any
fingerprints, dust, or smudges.
Be sure to also remove any leftover adhesive from the
protective sheet from the factory that you removed.
3
Place the anti-glare film for the touchscreen on the
main display with its glossy side facing down.
Notes
Glossy side facing
down.