104
Troubleshooting
A
ppen
dix
Videos do not appear in the lists.
The connected device is not turned
on.
Restart the device.
The cables are not connected
properly.
Connect the cables properly.
The video input signals are not
assigned properly.
Assign the video input signals properly.
For details, see “[Input]” (page 97).
The tab you want to operate does
not appear in the sub screen.
The appropriate list is not open.
Display the list for the desired option from the
[Option] menu.
For details, see “Sub Screen” (page 37).
The [Option] menu is open.
Titles are not inserted properly.
The image file that includes the
alpha channel was not created
properly.
Create the image file with the alpha channel again,
and make sure to do so properly.
Adjustments have not been
performed properly.
Perform adjustments in the [Title 1] or [Title 2] screen
in the sub screen.
For details, see “To adjust the appearance of
composites” (page 45).
Audio is not output from the
headphones or speakers. (The
audio level meter does not move.)
The connected device is not turned
on.
Turn on the device.
The cables are not connected
properly.
Connect the cables properly.
The audio input signals are not
assigned properly.
Assign the audio input signals properly.
For details, see “[Input Channel Assign]” (page 99).
The [CH On] button is turned off.
Enable (i.e., light) the [CH On] button.
For details, see “Step 5: Audio Mixing” (page 31).
The channel fader is lowered.
Raise the channel fader.
For details, see “Step 5: Audio Mixing” (page 31).
The PGM OUT fader is lowered.
Raise the PGM OUT fader.
For details, see “Step 5: Audio Mixing” (page 31).
The audio is not as expected. The
PGM (or MIX) audio cannot be
heard.
The target for monitoring is
incorrect.
Tap [PGM] (or [MIX]) at the bottom of the audio level
meter to switch to the audio you want to monitor.
For details, see “Switching the Monitored Audio”
(page 74).
The output settings are incorrect.
Select the [PGM OUT] and [MIX OUT] checkboxes in
[System Setup] > [Audio Setup] > [Input Channel
Assign].
For details, see “[Input Channel Assign]” (on
page 99).
Audio is not output from the
headphones or speakers. (The
audio level meter does move.)
The monitor output level is low.
Raise the level via [Monitor Level] adjustment.
For details, see “Adjusting the audio level for
monitoring” (on page 32).
Audio is not output from the
internal speakers.
A device is connected to the
monitor output connector.
When the HEADPHONES jack is in use, audio output
from the internal speakers is disabled. Disconnect
the device.
Symptom
Possible cause
Solution
Summary of Contents for AWS-750
Page 121: ......
