HPM6 Power Management Controller User Manual
Page 116 of
146
No.
Name
Description
Remark
101.
Bu Voltage Abnormal
102.
Bus Frequency Abnormal
103.
Bus Voltage/Frequency
Abnormal
104.
Lamp Alarm
When common alarm or common block occurs,
it outputs cyclically every 1 second; it keeps
outputting after acknowledge; if common trip
and stop alarm occurs, it outputs cyclically
every 0.5 second; it keeps outputting after
acknowledge.
105.
Audible Alarm
Output at common alarms, close to output after
acknowledge.
106.
Unload Failure
107.
Unload Output
108.
Gen Insufficient Capacity
When controller detects all normal gensets are
on grid, and remaining power cannot request
power, it outputs.
109.
HC1 Permission
When HC requests, and bus power is met, it
outputs; when power is not met, it doesn't
output. If HC feedback signal is active, it
continues to output.
110.
HC2 Permission
111.
HC3 Permission
112.
HC4 Permission
113.
Unbalanced Distribution of
Active Power
Outputs when active power percentage and
target active power percentage is greater than
the set value.
114.
Unbalanced Distribution of
Reactive Power
Outputs when reactive power percentage and
target reactive power percentage is greater
than the set value.
115.
Unbalanced Distribution of
Load
Outputs when either unbalanced active
distribution or reactive distribution is active.
116.
Self-check Normal Output
Output when self-check conditions are met
according to setting.
117.
Reserved
118.
Reserved
119.
Reserved
120.
Reserved
121.
SG Solenoid Valve Closing SG solenoid valve closes and outputs.
122.
SG Solenoid Valve
Opening
SG solenoid valve opens and outputs.
123.
SG Insufficient Capacity
When the controller operates in SG mode and
load receiving mode, if SG on-load is active, but
SG capacity is insufficient to receive the full
load, it outputs.
