HPM6 Power Management Controller User Manual
Page 115 of
146
No.
Name
Description
Remark
heavy consumer 2 inquiry power.
64.
HC3 ACK
Active when bus left available power can meet
heavy consumer 3 inquiry power.
65.
HC4 ACK
Active when bus left available power can meet
heavy consumer 4 inquiry power.
66.
Start Failure
Active when start failure alarm occurs.
67.
Manual Mode
Active in Manual mode.
68.
Semi-auto Mode
Active in Semi-auto mode.
69.
Auto Mode
Active in Auto mode.
70.
Light Consumer
Active when light consumer outputs.
71.
NEL 1 Trip
Active when non-essential load 1 trip occurs.
72.
NEL 2 Trip
Active when non-essential load 2 trip occurs.
73.
NEL 3 Trip
Active when non-essential load 3 trip occurs.
74.
Engine Fault
Active when engine fault signal outputs.
75.
Start Success
Active when the generator voltage and
frequency have reached the requirement.
76.
Synchronizing
Active when genset is synchronizing.
77.
Reserved
78.
Pre-close Output
Storage output of genset main switch.
79.
Reserved
80.
Reserved
81.
PLC Flag 1
PLC logic flag outputs.
82.
PLC Flag 2
83.
PLC Flag 3
84.
PLC Flag 4
85.
PLC Flag 5
86.
PLC Flag 6
87.
PLC Flag 7
88.
PLC Flag 8
89.
PLC Flag 9
90.
PLC Flag 10
91.
PLC Flag 11
92.
PLC Flag 12
93.
PLC Flag 13
94.
PLC Flag 14
95.
PLC Flag 15
96.
PLC Flag 16
97.
PLC Flag 17
98.
PLC Flag 18
99.
PLC Flag 19
100.
PLC Flag 20
